There are many parts of a car, and it is really difficult to understand them all. Today we are introducing automotive clutches. The clutch release bearing is a very important part of automobiles. It will be very troublesome if it fails due to poor maintenance.

The clutch release bearing is an important part of the car. If it is not well maintained and malfunctions, it will not only cause economic losses, but also it is quite troublesome to disassemble and assemble once, and it takes a lot of man-hours. Therefore, to find out the cause of the clutch release bearing failure, and to maintain and maintain it reasonably during use, is of great significance to prolong the life of the release bearing, improve labor productivity, and obtain better economic benefits.

The clutch release bearing is installed between the clutch and the transmission. The release bearing seat is loosely sleeved on the tubular extension of the first shaft bearing cover of the transmission. The shoulder of the release bearing is always against the release fork through the return spring and retracts to the final position. , Keep a gap of about 3~4mm with the end of the separation lever (separation finger).

Since the clutch pressure plate, the release lever and the engine crankshaft operate synchronously, and the release fork can only move axially along the output shaft of the clutch, it is obviously impossible to directly use the release fork to dial the release lever. The release bearing can make the release lever rotate side by side. The output shaft of the clutch moves axially, which ensures that the clutch can engage smoothly, disengage softly, reduce wear, and extend the service life of the clutch and the entire drive train.

Taizhou Benwo Auto Parts Co., Ltd. not only produces Release Bearing but also Hydraulic Clutch Bearing and other bearings. Welcome to visit our official website.